BOLETÍN TÉCNICO
DESCRIPCIÓN POLIETILENO
ARCHIVO
ALKATHENE XDS34 (I2 = 0,30, densidad = 0,922). Is a low density polyethylene designed for a variety of heavy gauge (70 - 200 3m) film applications. XDS34 does not contain any additives, is intended for applications such as sacks, palletwrap and a variety of industrial films
requiring heavy gauge (70 - 200 3m) film.
Descargar Boletín Técnico
5502-E (I2 = 0,21, densidad = 0,955). High-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to
make, by blow moulding-extrussion, tanks for liquid detergents and chemicals. This grade contains stabilisers according to the
end use of the item in order to reinforce the thermal stability.
Descargar Boletín Técnico
BFN-922 (I2 = 2,0, densidad = 0,918).Is a butene linear low density polyethylene resins intended for blown and Cast film applications. The film made from these resins display very good tensile properties and outstanding toughness. These properties, coupled with the resins’s good drawdown capability, permit downgauging in many film appplications.
Descargar Boletín Técnico
CERTENE
LLBI-5526
(I2 = 55,0 densidad = 0,926).Is a certified prime grade, containing Butene-ethylene copolymer designed for High-Flow INJECTION MOLDING of thin-walled high quality applications. LLBI-5526 features superior processability over a wide range of molding conditions, fast cycle times, very good rigidity, high gloss surface, low temperature toughness, and warpage free moldings. LLBI-5526 applications include housewares, margarine tubs, small to medium containers, trash cans, toys, and multicavity lids, closures and caps, where excellent toughness, good impact strength and high gloss are required. Recommended processing temperature is 170 to 210°C., with mold at 20 to 40°C. LLBI-5526 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles.
Descargar Boletín Técnico
D777C (I2 = 7,0, densidad = 0,918).Is a LDPE extrusion coating grade for general purpose. General extrusion coating, extrusion lamination, co-extrusion coating, For coating on different substrates; Aluminium foil, Paper, tarpaulin and flexible films(PET, OPP, Nylon).
Descargar Boletín Técnico
DMDA-6147 (I2 = 10,0 densidad = 0,948).Is a polymer with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability, which contribute to uniform wall thickness in large parts.
Descargar Boletín Técnico
DMDA-6200 NT7 (I2 = 0,38 densidad = 0,955).Is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals.
Descargar Boletín Técnico
DMDA-8904 (I2 = 4,4 densidad = 0,952).Is produced via UNIPOL Process Technology from Dow and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent process ability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. This resin is also suitable for cast film extrusion processing.
Descargar Boletín Técnico
DMDA-8920 (I2 = 20, densidad = 0,954).Is produced via UNIPOL. Process Technology from dow and is intended for use in a broad of injection molding applications such as housewares, toys, food containers and pails.
Descargar Boletín Técnico
DOWLEX 2045G (I2 = 1.0, densidad = 0,920). Is designed for the production of a wide variety of industrial and consumer films.
Descargar Boletín Técnico
DOWLEX 2045.01G (I2 = 1.0, densidad = 0,922). Is designed for the production of a wide variety of industrial and consumer films. Films made from this resin exhibit a combination of excellent toughness and tear resistance.
Descargar Boletín Técnico
DOWLEX 2645.01G (I2 = 0.85, densidad = 0,918). Is designed for the production of a wide variety of industrial and consumer films (though it is not reccomended for silage stretch film). Film made this resin exhibit a combination of excellent toughness and tear resistance.
Descargar Boletín Técnico
DOW LDPE 312E (I2 = 0.75, densidad = 0,923). Is a fractional melt index low density polyethylene resin, containing slip and antiblock additives.
Descargar Boletín Técnico
DOW LDPE 682S (I2 = 0,7, densidad = 0,922). Polietileno de baja densidad destinado a la fabricación de película termocontraible, película para laminación, bolsas de uso general, lámina para plasticultura y la construcción etc.
Descargar Boletín Técnico
E-52009 (I2 = 0,90 densidad = 0,952).Is High Density Polyethylene (HDPE) grade with low gel content,, excellent orientation characteristic and negligible water carry-over. This grade is recommended for making raffia tapes and monofilaments (Diameter >0.20 mm) with excellent balance of high tenacity and good elongation.
Descargar Boletín Técnico
EDF-224F (I2 = 2,0 densidad = 0,924).Is a certified prime grade 3 wt% VINYL ACETATE-ETHYLENE copolymer designed for production of specialty blown films requiring excellent balance of mechanical and optical properties.
Descargar Boletín Técnico
EF-1925 (I2 = 2,50 densidad = 0,921). Is a low density formulation suggested for film applications that require a good balance of properties such as converter film for industrial packaging and general purpose packaging.
Descargar Boletín Técnico
ELITE-5815 (I2 = 15,0 densidad = 0,910).It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate deal strength, and good taste and odor performance.
Descargar Boletín Técnico
GA-564189 (I2 = 21,0 densidad = 0,924). Exhibits good stiffness and low temperature toughness. Typical applications include trash cans, industrial containers, housewares and toys.
Descargar Boletín Técnico
GA-672762 (I2 = 1,7 densidad = 0,944). Is a hexene HDPE resin used mainly for rotationally molding large tank applications. GA672762 is UV-stabilized and is available in a 35 mesh powder as MICROTHENE®
MP672762.
Descargar Boletín Técnico
H5520
(I2 = 20, densidad = 0,955). Provides good processing characteristics and exhibits excellent toughness and color as well as low odor and good molded-part stability. Typical applications include housewares, caps, closures and various food containers.
Descargar Boletín Técnico
H5604F (I2 = 0,04 densidad = 0,956).Is a product of bi-modal process from Mitsui Chemicals, Inc. of Japan.
Descargar Boletín Técnico
HANWHA 3304 (I2 = 1,1 densidad = 0,923). Es un PEBD-L destinado a la fabricación de película para uso agrícola y de uso general por extrusión soplado. Aditivos que posee: agente deslizante, antibloqueante, y antioxidante. Presenta buena procesabilidad y buena resistencia mecánica y buenas propiedades ópticas. R/S máxima recomendada: 3:1.
Descargar Boletín Técnico
HB-5502B
(I2 = 0,35 densidad = 0,955). Is designed for applications requiring excellent stiffness and stress crack resistance
properties. It may be used as a general-purpose blow molding resin or sheet extrusion thermoforming resin.
Descargar Boletín Técnico
HD 8460.29
(I2 = 3,3 densidad = 0,938). Es un polietileno lineal de media densidad copolímero hexeno diseñado de tal manera que cuenta con excelente ESCR y resistencia mecánica. Esta resina es ideal para aplicaciones que requieran un muy buen balance de rigidez, procesabilidad, y resistencia mecánica.
Descargar Boletín Técnico
HD-8660.29
(I2 = 2, densidad = 0,942). Is a high density hexene copolymer designed to offer superior toughness and stiffness. This resin is ideally suited for applications that require the optimum balance of low temperature toughness, creep resistance, stiffness, ESCR, and tear
properties.
Descargar Boletín Técnico
HDPE-5000S
(I2 = 0,80 densidad = 0,954). Good spinning and stretching High trength and Melting stability, Monofilament for rope and net.
Descargar Boletín Técnico
HDPE-53050E
(I2 = 0,30 densidad = 0,952). Is a high molecular weight high density polyethylene copolymer which has been specifically designed for the production of high strength blown film of various thicknesses even down to below 10 microns.
Descargar Boletín Técnico
HDPE-7200 (I2 = 22,0 densidad = 0,955). Es un PEAD alta fluencia destinado a ser utilizado mediante el proceso de inyección. Posee buena procesabilidad y es apto para ciclos rápidos. Se utiliza para fabricar un amplio número de artículos tales como objetos de bazar, bandejas para alimentos, juguetes, envases, etc.
Descargar Boletín Técnico
HDPE-90052L (I2 = 10,5 densidad = 0,9520). Es un Polietileno de Alta Densidad y Alto Peso Molecular producido mediante el Proceso Slurry. Esta resina presenta buena procesabilidad y soldabilidad. Se caracteriza por su excelente resistencia al rasgado y al impacto en películas de bajo espesor.
Descargar Boletín Técnico
HDPE KT-10000 UE
(I2 = 8,0 densidad = 0,964). Es una resina estabilizada para UV con una distribución de pesos además de buena resistencia al impacto, con una deformación mínima.
Descargar Boletín Técnico
HFB-950 (I2 = 0,045, densidad = 0,952).Is a high molecular weight (HMW) HDPE resin with broad, bimodal molecular weight distribution Applications: This resin demonstrates outstanding performance for high strength applications such as grocery sacks, institutional and consumer can liners, merchandise bags, produce bags, and T-shirt bags.
Descargar Boletín Técnico
HI-2053 (I2 = 20, densidad = 0,953). Is a certified prime grade Hexene copolymer designed for INJECTION MOLDING of good performance general purpose applications.
Descargar Boletín Técnico
HI-3052 (I2 = 30,0 densidad = 0,952).Is a certified prime grade Hexene copolymer designed for INJECTION MOLDING general purpose thin-wall applications requiring good balance of properties.
Descargar Boletín Técnico
HI-752 (I2 = 7,0 densidad = 0,952).Is a certified prime copolymer designed for INJECTION MOLDING applications requiring good balance of mechanical properties. HI-752 features easy processability, good stiffness, good impact strength, high warpage resistance and excellent dimensional stability.
Descargar Boletín Técnico
HI-864U (I2 = 8,0 densidad = 0,964). Is a certified prime grade UV STABILIZED designed for INJECTION MOLDING of large sized industrial applications requiring superior Toughness and high Stiffness.
Descargar Boletín Técnico
HI-963U (I2 = 8,5 densidad = 0,963). Is a certified prime grade UV STABILIZED designed for INJECTION MOLDING of large sized industrial
applications requiring superior Toughness and high Stiffness.
Descargar Boletín Técnico
HMP-9503
(I21 = 0,35 densidad = 0,955) High Density polyethylene for Blow Molding applications. General Purpose for blow molding. Applications: This resin is recommended for applications that require a combination of good mechanical properties and good Stress Craking Resistance (ESCR)
Descargar Boletín Técnico
HWB-1051 (I2 = 0,06 densidad = 0,951). Is a certified prime grade Hexene copolymer High Molecular Weight developed for BLOW MOLDING of high performance medium to large size industrial containers.
Descargar Boletín Técnico
HWB-554 (I2 = 0,28 densidad = 0,954). Is a certified prime grade Hexene copolymer High Molecular Weight developed for BLOW MOLDING of high performance medium to large size industrial containers.
Descargar Boletín Técnico
HWF-1052 (I2 = 10,0 densidad = 0,952). Is a certified prime grade Hexene copolymer HIGH MOLECULAR WEIGHT developed for production of
thin gauged, high stiffness and high strength films.
Descargar Boletín Técnico
HWF-852B (I2 = 0,05 densidad = 0,952). Is a certified prime grade Hexene copolymer HIGH MOLECULAR WEIGHT developed for production of thin gauged high stiffness paper-like Blown films.
Descargar Boletín Técnico
LDF-0218A
(I2 = 0,25, densidad = 0,918). Is a certified prime resin specially designed for production of heavy duty Blown films for industrial applications requiring excellent mechanical properties, such as heavy duty sacks, shipping bags, shrink wrapped pallet hoods, construction, agriculture and greenhouses.
Descargar Boletín Técnico
LDF-0221J
(I2 = 0,25, densidad = 0,921). Is a certified prime grade specially designed for EXTRUSION of heavy duty Blown Film for industrial
applications requiring excellent mechanical properties, such as heavy duty sacks, shipping bags, shrink wrapping pallet
hoods, construction, agriculture and greenhouses.
Descargar Boletín Técnico
LDF-0822A
(I2 = 0,8, densidad = 0,922). Is a certified prime resin specially designed for production of shrink wrapping Blown films for case bundling applications requiring excellent shrink performance, very high toughness, good puncture and burn-through resistance.
LDF-0822A is also recommended for impact liner films.
Descargar Boletín Técnico
LDF-0824C (I2 = 0,8, densidad = 0,924).Is a certified prime resin specially designed for production of shrink wrapping Blown films for case bundling applications requiring excellent shrink performance, very high toughness, good puncture and burn-through resistance.
Descargar Boletín Técnico
LDF-222C
(I2 = 2,0, densidad = 0,922). Is a certified prime resin specially designed for production of high clarity Blown films forpackaging of articles requiring good opticals such as baked products, sandwich bags, light duty produce bags, toilet paper and textiles.
Descargar Boletín Técnico
LDF-224C (I2 = 2,0, densidad = 0,924).Is a certified prime resin specially designed for production of high clarity Blown films for packaging of articles requiring good opticals such as baked products, sandwich bags, light duty produce bags, toilette paper and textiles.
Descargar Boletín Técnico
LDF-720A (I2 = 7,0, densidad = 0,922).Is a certified prime resin specially designed for production of high drawdown thin gauged high clarity Blown films. LDF-720A features excellent combination of easy processability at high extrusion rates and very good balance of film mechanical properties. Films display very good color stability and superior heat seal performance.
Descargar Boletín Técnico
LDF-1220A (I2 = 12,0, densidad = 0,915).Is a certified prime extrusion coating resin specially designed for high speed, lightweight extrusion coating.
Descargar Boletín Técnico
LDI-2618 I2 = 26,0 densidad = 0,918). Es un polietileno de baja densidad lineal, PEBDL, diseñado para ser utilizado en el proceso de inyección. Es de fácil procesabilidad y posee un buen balance de propiedades. Sus aplicaciones típicas son la fabricación de tapas, artículos de bazar, juguetes y utensilios de cocina entre otros.
Cumple con las regulaciones FDA 21CFR 177.1520 © 2.1+2.2 y la mayoría de las regulaciones internacionales referentes al uso del polietileno en contacto con alimentos.
Descargar Boletín Técnico
LRU 935 (I2 = 3.5 g/10 min, Densidad = 0,940 g/cc) Linear medium density polyethylene for rotational molding applications including large
containers, drums, small tanks, bins and playground equipment.
Descargar Boletín Técnico
LDPE LL-8460 (I2 = 3,3 densidad = 0,938). Is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance of processability, stiffness and low temperature toughness.
Descargar Boletín Técnico
LDPE XB 81810.34 (I2 = 2,0, densidad = 0,922).Es un Polietileno de Baja Densidad producido mediante el proceso de Alta Presión. Esta resina
presenta buen balance de propiedades ópticas y mecánicas. Se caracteriza por su buena procesabilidad.
Descargar Boletín Técnico
LDPE-5301 (I2 = 0,30, densidad = 0,921). Is manufactured by DOW tubular high pressure process and designed for variety film application such as shrink, heavy duty and greenhouse film.
Descargar Boletín Técnico
LDPE-5302 (I2 = 0,30, densidad = 0,922).Is manufactured by DOW tubular high pressure process and designed for variety of film application such as heavy duty and greenhouse film.
Descargar Boletín Técnico
LDPE-5316 (I2 = 0,8 densidad = 0,922). Is manufactured by DOW tubular high pressure process and designed for variety of film application such as greenhouse film. LDPE 5316 has well balanced property of high clarity, mechanical property and processability.
Descargar Boletín Técnico
LDPE-582E (I2 = 3,5 densidad = 0,922). Polyethylene Resin con be readily be readily extruded using conventional blown film techniques utilising melt temperatures between 105 and 170ºC.
Descargar Boletín Técnico
LDPE-LD 312.23
(I2 = 1,0 densidad = 0,925). Is a 4.6 wt% vinyl acetate copolymer for films with good toughness. The comonomer content and low melt index of this resin help produce films which exhibit superior impact strength, good heat sealability and good low temperature properties.
Descargar Boletín Técnico
LF-1040 (I2 = 2,0, densidad = 0,919). Is a butene LLDPE resin with excellent mechanical and sealing properties. It can be used in stretch film and can liner applications, and is suitable for blending with LDPE in packaging applications.
Descargar Boletín Técnico
LH-4100 (I190/2,160 = 0,06; I190/5,0 = 0,30 g/10 min.; densidad = 0,948 g/cc) Es un polietileno de alta densidad copolímero hexeno destinado a la fabricación de tuberías.
Clasificación según ISO/DIS 12162 - MRS 10 MPa - PE 100
Clasificación según ASTM D 1248, III, Clase A Cat. 5
Descargar Boletín Técnico
LL601 (I2 = 1,0 densidad = 0,925). Is a hexene linear low density polyethylene copolymer designed for a variety of general purpose film applicoations requiring a good balance between stiffness and toughness. LL601 is formulated with process stabilisation, antiblocking and slip (high slip) additives.
Descargar Boletín Técnico
LLBF-122F (I2 = 1,0 densidad = 0,922).Is a certified prime resin Butene-comonomer, specially designed for production of high performance Blown films for general purpose packaging. LLBF-122F features excellent combination of easy processability with very good film strength as well as wide heat sealing temperature range.
Descargar Boletín Técnico
LLBF-218A (I2 = 2,0 densidad = 0,918).Is a certified prime resin with Butene-comonomer designed for production of Cast or Blown film for Stretch-Cling and General Purpose applications.
Descargar Boletín Técnico
LLBF-223G (I2 = 2,0 densidad = 0,923).is a certified prime resin Butene-comonomer, designed for production of high drawdown, high output general purpose packaging Blown films. LLBF-223G features a combination of excellent processability with good film strength as well as wide heat sealing temperature range.
Descargar Boletín Técnico
LLBI-2024 (I2 = 20, densidad = 0,924).Is a certified prime grade containing Butene-ethylene copolymer, designed for INJECTION MOLDING applications requiring good balance of low warpage, low temperature resistance, and good mechanical properties.
Descargar Boletín Técnico
LLDPE DNDA-8320
(I2 = 20,0 densidad = 0,924). Is produced using the UNIPOL Process Technologu is intended for use in general purpose injection molding applications. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.
Descargar Boletín Técnico
LLDPE-7047P (I2 = 1,0 densidad = 0,920). Es un PEBD-L copolimero etileno/buteno destinado a la fabricación de película de uso general por extrusión soplado. Aditivos: antibloqueante: no posee, agente deslizante: no posee. Presenta buena procesabilidad y buena resistencia mecánica. R/S máxima recomendada: 2.1.
Descargar Boletín Técnico
LLDPE-UL814 (I2 = 20,0 densidad = 0,924). Es un polietileno de baja densidad lineal, PEBDL, diseñado para ser utilizado en el proceso de inyección. Sus aplicaciones típicas son la fabricación de tapas, artículos de bazar, juguetes y utensilios de cocina entre otros.
Descargar Boletín Técnico
LLDPE 3306W
(I2,8 = 1,0, densidad = 0,918). Is designed for cast multi layer stretch wrap film. LLDPE 3306W has excellent drawdown and mechanical property.
Descargar Boletín Técnico
LLHF-118A
(I2 = 1,0, densidad = 0,918). Is a certified prime grade Ethylene–Hexene Copolymer specially developed for extrusion of BLOWN or CAST films with outstanding Tensile and Toughness.
Descargar Boletín Técnico
LLHR-440U (I2 = 4, densidad = 0,940). Is a certified prime grade UV Stabilized Ethylene–Hexene Copolymer designed for high performance outdoor exposure Rotomolded applications.
Descargar Boletín Técnico
LT-74104
(I2 = 1,0, densidad = 0,920). Is a high strength linearlow density polyethylene containing no slip or antiblock. It is designed for film applications and is well suited for consumer and industrial packaging marketswhich require good impact and tear strength.
Descargar Boletín Técnico
LT-74105 (I2 = 1,0 densidad = 0,920). Is a high strength linear low density polyethylene containing medium slip and medium antiblock. It is designed for blown film applications and is well suited for consumer and industrial packaging markets which require impact and tear strength. Films produced using LT-74105 exhibit low imperfections and facilitate production at thinner gauges.
Descargar Boletín Técnico
Lupolen-2420D (I2 = 0,25 densidad = 0,923). Is a non-additivated, low density Polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation.
Descargar Boletín Técnico
Lupolen-2420H (I2 = 1,9 densidad = 0,924). Is a non-additivated, low density Polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation.
Descargar Boletín Técnico
MFH-921 (I2 = 1,0, densidad = 0,92). Is linear low density polyethylene resins intended for processing into blown film to produce sealant films with low COF, good sealability and good machanical proerties. MFH-921 contain slip or antiblock additives.
Descargar Boletín Técnico
MFN-921 (I2 = 1,0, densidad = 0,919). Is linear low density polyethylene resins intended for processing into blown film to produce a wide variety of films. MFN-921 does not contain slip or antiblock additive.
Descargar Boletín Técnico
Mono-87 (I2 = 0,95, densidad = 0,947). Compuesto de polietileno destinado a la fabricación de monofilamento y películas de alta rigidez.
Descargar Boletín Técnico
NA-204-000 (I2 = 7,0, densidad = 0,918). Is a general-purpose resin recommended for intermediate and light-weight coating applications at high speeds. NA 204-000 can be drawn down to weights of 5.0 lb/ream at line speeds of 1200 ft/min. on a variety of substrates including paper, foil, cellophane, polyester film and other base stocks. NA 204-000 yields excellent adhesion and heat sealing characteristics and low neck-in. It is recommended for general-purpose flexible packaging, foil mounting, laminating and aseptic packaging.
Descargar Boletín Técnico
NG-7000 Modificado (I2 = 10,0, densidad = 0,99). Compuesto de PEAD prime mezclado en seco con 8% de carga mineral.
Descargar Boletín Técnico
PE-033 (I2 = 0,30, densidad = 0,922). Is a low density polyethylene grade, produced by high pressure autoclave technology, for blown or cast film applications.
Descargar Boletín Técnico
PEBD 2221FG (I2 = 2,1, densidad = 0,922).Se fabrica en reactor autoclave. Está indicado para la producción de películas finas por extrusión tubular. Combina una notable facilidad de procesado con buenas propiedades mecánicas y ópticas. Contiene deslizante (erucamida), antibloqueo y antioxidante.
Descargar Boletín Técnico
PEBD ALCUDIA 2008FG (I2 = 0,75, densidad = 0,922).Se fabrica en reactor tubular. Está indicado para la producción de películas por extrusión tubular y plana. Combina una notable facilidad de procesado con buenas propiedades mecánicas y ópticas y buen deslizamiento. Contiene antibloqueo y deslizante (erucamida).
Descargar Boletín Técnico
PETLIN LD N103X (I2 = 0,3, densidad = 0,921). Is a low density polyethylene resin for heavy film applications. It is produced by the state-of-the-art- DSM Stamicarbon tubular process. It contains antioxidant (BHT free) additives. It is intended primarily for blown film process.
Descargar Boletín Técnico
PETLIN LD N125Y (I2 = 2,5, densidad = 0,921).Is a low density polyethylene resin for general purpose film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free), slip and antiblock additives. It is intended primarily for film process.
Descargar Boletín Técnico
Q-1018 (I2 = 1,0 densidad = 0,918). Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure form as well as blended with other PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or co-extrusion process to modify film properties.
Descargar Boletín Técnico
Q-2018 (I2 = 2,0 densidad = 0,918). Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure form as well as blended with other PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or co-extrusion process to modify film properties.
Descargar Boletín Técnico
TAISOX 3214 (I2 = 1,0, densidad = 0,920). Es un PEBD-L copolimero etileno/buteno destinado a la fabricación de película de uso general por extrusión soplado. Aditivos: antibloqueante concentración media y agente deslizante concentración media. Presenta buena procesabilidad y buena resistencia mecánica. R/S máxima recomendada: 2.1.
Descargar Boletín Técnico
UT-404 (I2 = 2,8, densidad = 0,918). Good mechanical properties, Excellent puncture resistance,Butene copolymer, Blown or Cast Film (Stretch wrap film) Non slip, Non antiblocking agent.
Descargar Boletín Técnico
XUS-61511.00 (I2 = 0,95, densidad = 0,9195).Is designed for production of a wide variety of films. Films made from this resin exhibit a combination of good toughness and tear resistance.
Descargar Boletín Técnico
YUZEX 6100 (I2 = 0,052, densidad = 0,952).Is high density polyethylene designed for pressurized pipe and produced by bi-modal operation in dual slurry reactor. It is classfied as PE100 class. It has an excellent processability in pipe extrusion and balanced physical properties.
Descargar Boletín Técnico
BOLETÍN TÉCNICO
DESCRIPCIÓN POLIESTIRENOS
ARCHIVO
G144 (I200/5,0 = g/10 min; densidad = 1,04 g/cc Cristal). Es un poliestireno cristal de uso general. Está recomendado para aplicaciones donde es importante un balance adecuado de flujo en molde y tenacidad en la pieza terminada.
Descargar Boletín Técnico
SOLARENE HIPS,
H-645(EP)
(I2 = 7.0 Alto Impacto). Es un poliestireno de alto impacto, de alta fluencia destinado a inyección de piezas rígidas, de buen brillo. Posee alta resistencia a la temperatura y alto impacto.
Descargar Boletín Técnico
SOLARENE HIPS,
H-724(EP)
(I2 = 3.5 Alto Impacto). Is high impact and heat resistance polystyrene mainly for extrusion process.
Descargar Boletín Técnico
STYRON 686E (MI = 2,4 g/10 min. 200 ºC/5 Kg.). diseñada para aplicaciones en moldeo por inyección y  extrusión. Presenta muy buen equilibrio en resistencia al calor, dureza y fluidez. También ofrece buena estabilidad dimensional y claridad de los artículos. Aprobado para estar en contacto con alimentos. Aplicaciones: láminas de PS expandido como bandejas para huevos y envases de alimentos de paredes delgadas, artículos de pared media y gruesa de piezas inyectadas.
Descargar Boletín Técnico
BOLETÍN TÉCNICO
DESCRIPCIÓN POLIPROPILENO
ARCHIVO
Formolene 3312B
(I2 = 12,0, densidad = 0,9). Is a medium melt flow random copolymer with fast cycle time and easy mold release. It is designed for injection molding applications. Its clarity makes it an excellent choice for “see-through” housewares and rigid packaging.
Descargar Boletín Técnico
Formolene 2510A
(I2 = 10,0, densidad = 0,9). Is a medium impact copolymer of polypropylene for use in injection molding applications including battery cases and lids.
Descargar Boletín Técnico
Formolene 2550a
(I2 = 50,0, densidad = 0,9). Is a medium impact, high flow copolymer of polypropylene designed for such applications as housewares, containers and other rigid packaging.
Descargar Boletín Técnico
Formolene 3302B
(I2 = 2,3, densidad = 0,9). Is a low melt flow random with excellent clarity, fast cycle time and easy mold release, designed for extrusion processing and thermoforming.
Descargar Boletín Técnico
Formolene 3320B
(I2 = 20,0, densidad = 0,9). Is a high flow random copolymer with fast cycle time and easy mold release. It is designed for injection molding applications.
Descargar Boletín Técnico
Formolene 6600A
(I2 = 0,5, densidad = 0,9). Is a high impact copolymer with an excellent balance of toughness and stiffness.
Descargar Boletín Técnico
PIC-9030
(I2 = 30,0 densidad = 0,90). Is a high crystalinity copolymer with high melt flow for Injection molded porcessing.
Applications include automotive interiors and large appliance parts.
Descargar Boletín Técnico
PPH1500 Is a homo polypropylene for injection molding applications. (MI 12) using the spheripol process licensed by Basell. This grade is designed to be processed in conventional injection molding equipment and offers high stiffness, heat stability, scratch resistance and high surface gloss.
Descargar Boletín Técnico
Propilco 05C05

(I2 = 7,0). Polipropileno copolímero de impacto de reología controlada; muy buen balance impacto/rigidez.
Recomendado para: inyección y extrusión de artículos propósito general.

Descargar Boletín Técnico
Ravago Argentina SRL Tel: +54-11 4714-6066 Contáctenos:
Martinez Rodriguez 4320
(B1644CGL) Victoria
Provi. de Buenos Aires - Argentina
Ventas: int - 24101
Logística: int - 24107
Proveedores: int - 24201
info@entecresins.com.ar